Cashew Gate Insert Options

Standard Flow GTE (Square) & GTR (Round) Series Inserts

For tunnel gating of small to medium sized parts along a flat separating plane. The projecting calotte ensures concealed gating.

• Gate diameters available from 0.8mm to 2.4mm
• Suitable for all thermoplastics including fillers up to 50% glass fiber

Closed Gate MiniFlow^® GTM (Square) Series Inserts

For tunnel gating of small thin-walled parts. This gate insert posesses no calotte and is therefore suitable for very                 thin-walled molding.

• The closed surface enables the creation of individual gate diameters
• Suitable for all thermoplastics including fillers up to 50% glass fiber

Contourable MidiFlow^® GMK Series Inserts

For bottom (submarine) gating of medium components. Supports contouring to a depth of 8 mm. Suitable for gate diameters up to 1.8mm, shot weights up to 200g per insert and all common plastics, including reinforced type.

• Permits gating immediately behind projecting ribs
• Gate may be remote from molding wall
• The spherical geometry in the gate area permits gating on inclined or curved surfaces

Contourable MaxiFlow^® GXK Series Inserts

For bottom (submarine) gating of medium components. Supports contouring to a depth of 10 mm. Suitable for gate diameters up to 3.5mm, shot weights up to 1200g per insert and all common plastics, including reinforced type.

• Permits gating immediately behind projecting ribs
• Gate may be remote from molding wall
• The spherical geometry in the gate area permits gating on inclined or curved surfaces

Contourable KonturFlow^® GTK Series Inserts

For tunnel gating of small to mediumsized moldings contoured in the gate area.

• Maximum gate diameter (pointed tunnel) up to 1.7mm
• Contourable up to 3mm depth
• Usable for all thermoplastics including fillers up to 50% glass fiber