DME Mold Components

U.S. 800-626-6653 Canada 800-387-6600 dme@milacron.com www.dme.net store.milacron.com 206 Cavity and Core Components Indexable and Front Removable Mold Dating Inserts CAVITY AND CORE COMPONENTS Indexable and Front Removable Mold Dating Inserts 81 Ø F Ø D L Ø D (RELIEF) h7 m6 .5 x L ±.02 Ø G L OUTER INSERT INDEXABLE INNER INSERT INDEXABLE .6 x L Ø D m6 OUTER INSERT SPRING INNER INSERT L Ø F 81 ±.02 Ø D (RELIEF) h7 Ø G L Indexable Inserts U.S. Patent No. 5,788,872 Features of Indexable and Front Removable Inserts Designed for plastics injection molds Maximum operating temperature is 150°C (300°F) Numerals are 0.2mm deep and arrow is 0.4mm deep Arrow is adjustment slot Relief on bottom of insert will align insert into hole. An aluminum rod should be placed against the face of the insert with the rod larger in diameter than the Outer Insert. The aluminum rod should be tapped with a hammer to move the insert to its ush position. Inner insert must be ush or below ush during installation. NOTE: Indexable springs are built in. Installation and Machining for Both Insert Styles Press- t installation required Maintain a close tolerance press t. Too loose a t could allow the insert to move out of position, while too tight a press t might prevent the inner insert from rotating when required Accurately measure the Ø D for each part and machine Ø G hole to provide about 0.005mm (.0002") press t Relief on bottom of insert will align insert into hole. An aluminum rod should be placed against the face of the insert with the rod larger in diameter than the Outer Insert. The aluminum rod should be tapped with a hammer to move the insert to its ush position. Inner insert must be ush or below ush during installation. INFORMATION KEY: D = Outside Diameter of Outer Insert F = Outside Diameter of Inner Insert G = Hole Diameter L = Length Material: Stainless Steel Hardness: 50-55 HRC Max. Temp: 150°C (300°F) Dimensions: All dimensions are in mm, except as noted NOTE: Springs are for Front Removable Inserts only. Front Removable Springs ITEM NUMBER (PACKAGE OF 5) Ø D DFQ9006 6 DFQ9008 8 DFQ9010 10 DFQ9012 12 DFQ9016 16 DFQ9020 20 Dimensions and Tolerances of Indexable and Front Removable Inserts Ø D TOLERANCE L Ø F INDEXABLE INDEX Ø F FRONT REMOVABLE M6 H7 4 +0.012 TO +0.004 0 TO -0.012 8 2.4 6 +0.012 TO +0.004 0 TO -0.012 8 3.7 3.1 8 +0.015 TO +0.006 0 TO -0.015 10 5.0 4.4 10 +0.015 TO +0.006 0 TO -0.015 12 6.3 5.2 12 +0.018 TO +0.007 0 TO -0.018 14 7.5 6.2 16 +0.018 TO +0.007 0 TO -0.018 14 11.0 8.2 20 +0.021 TO +0.008 0 TO -0.021 16 13.2 11 Front Removable Inserts All dimensions and tolerances are in millimeters (mm).

RkJQdWJsaXNoZXIy NTE5NzY=