Hot Runner Cables
DME's Hot Runner Cables
Hot runner cables consist of mold power cables and thermocouple cables. Our hot runner cables are made of high-quality heavy gauge insulated wires and industry standard connectors rated at 15amps. DME hot runner controller cables come in 10, 20 and 30 foot standard lengths however custom lengths are available on request. Standard cables are wired in 5, 8, and 12 zones and are stocked for quick delivery. Have a special application/non-DME standard or are not sure what is needed? No problem, our team is standing by to help identify the required connectors and cabling and can easily assemble to meet your specific application. All cables are tested prior to shipment to ensure high quality connection.
Hot Runner Controller Cable Types
Mold Power Cables
Mold Power Cables are used to connect the temperature controller/Mainframe to the Power Input Connector on the mold. Allowing for quick connection to all heaters within the hot runner. Available in lengths of 10, 20 or 30 feet and are wired for 5, 8 or 12 zones (15 AMP). For high Power application 3 or 5 zones (30 AMP) cables are also available. All cables are for use with the appropriate Smart Series Mainframes and Mold Power Input Connectors. Specials are available upon request.
Thermocouple Cables
Thermocouple Cables are used to connect the temperature controller/Mainframe to the Thermocouple Connector on the mold. This cable carries temperature signal from the thermocouple in the mold back to the controller. TC cables are available in lengths of 10, 20 of 30 feet and are wired for 5, 8 or 12 zones for use with the appropriate Smart Series Mainframes and Thermocouple Connectors. Specials are available upon request. All cables are tested prior to shipment to guarantee reliability.