Money Saving Tip
 Mould Cleaner & Degreaser
D-M-E
Moulding Supplies would like to introduce our own Mould Cleaner +
Degreaser. Works with all metal moulds, leaves no residue. Loosens and
removes grease, oil and shop dirt accumulations and will not interfere
with moulding operations. Simply spray on mould surface, wipe with a
clean soft lint-free cloth to remove surface contamination. The
same high quality product you have been accustomed to purchasing at
D-M-E Moulding Supplies but with a savings over other leading brands of
Mould Cleaner and Degreasers. Contact your D-M-E
Moulding Supply representative for more benefits and uses.
Click here for current pricing.
Solution Center
Customer Question
We
will be removing our injection screw for inspection and would like to
clean it. What is the best method to clean the screw once removed?
Solution
 The
most effective time to clean a screw is immediately after use while it
is still evenly heated from operation. You should first purge the
injection system. While the barrel is still heated, pull the screw out
about 25 per cent of its length. For cleaning, use a brass brush, brass putty knife, copper gauze and silicone grease
to reduce drag. Never use an acetylene torch as this can cause
de-lamination of the metal wear coating and may undo the annealing of
the metal which could lead to breakage due to torque or cause the screw
to bend. Never use hard metal screw drivers, scrapers or pry bars. Once
the screw is partially removed, wrap a length of copper gauze coated with silicone grease
2 or 3 turns around the screw and using a shoe shine action walk it
down the screw as it is slowly pulled out and still heated. Buff the
surfaces with a clean cloth to finish. Apply a coat of light oil or WD40 if storing the screw. Remember to wear heat resistant gloves and eye protection.
Featured Product
Propane Canisters
D-M-E Moulding Supplies is proud to offer the Lenox Fat Boy Propane
Canister to its line of product offerings. The canister contains
16.92oz of propane and comes contained inside a durable cast aluminum
case. The Fat Boy contains 20% more gas than the majority of its
competitors meaning longer run times for you the customer. It
also boasts a 25% height reduction for greater accessibility.
Click here for more info and pricing.
Granulator Screens
 D-M-E
Moulding Supplies is proud to introduce our new line of granulator
screens. These screens are manufactured for your specific application
from a standard ASTM A36 material or an AR235 steel for processing high
abrasive materials. Standard screens can also undergo a heat treating
process which will raise the hardness to Rc55. Holes are precision
drilled or punched to ensure uniform sizing. D-M-E Moulding Supplies
now offers 1000 varieties of screens to fit your requirement. Contact
your D-M-E Moulding Supplies representative for a quote on granulator knives and now granulator screens.
Did You Know...
•
With 382,650 babies being born each day and 144,902 people dying daily,
the world population increases about 237,748 people a day.
•
The Netherlands is credited with having the most bikes in the world.
One bike per person is the national average with an estimated 16
million bicycles nation wide.
• Nearly one-fourth of the
world's population lives on less than $200 a year. More than 90 million
people survive on less than $75 a year.
• The United States
earned the title of having the most automobiles of any country in the
world. With an estimated 135 million cars nation wide, it is
approximated that there is one car for every two Americans.
|
|
|
