D-M-E TOGGLE-LOK POSITIVE EARLY EJECTOR RETURN

D-M-E TOGGLE-LOK POSITIVE EARLY EJECTOR RETURN INFORMATION

1. ARE THE BERMER EARLY RETURN AND THE TOGGLE-LOK THE SAME?

YES. THIS DEVICE WAS OBTAINED BY D-M-E FROM BERMER TOOL & DIE.

2. DOES THE TOGGLE-LOK UTILIZE SPRINGS?

NO. THE TOGGLE-LOK IS AN EXTERNALLY MOUNTED DEVICE USED TO POSITIVELY RETURN THE EJECTOR ASSEMBLY BEFORE THE MOLD CLOSES. IT DOES NOT UTILIZE SPRINGS. INSTEAD, IT USES A POSITIVE CAM LINKAGE AND ACTUATOR LEVER RATHER THAN SPRINGS, HYDRAULICS OR PNEUMATICS.

3. DOES D-M-E MANUFACTURER SPECIALS OF THE TOGGLE-LOK?

UNFORTUNATELY, D-M-E DOES NOT MANUFACTURER SPECIAL SIZES OF THE TOGGLE-LOK. HOWEVER, WE PROVIDE A BROCHURE WITH ALL COMPONENT SIZING SO THAT THE CUSTOMER MAY MANUFACTURE THEIR OWN SPECIAL SIZES TO SUIT THEIR SPECIAL NEEDS.

FOR FURTHER INFORMATION ON THE D-M-E TOGGLE-LOK REFER TO THE INSTALLATION INSTRUCTIONS THAT ARE PACKAGED WITH EACH UNIT, OR ASK FOR THE TOGGLE-LOK BROCHURE WHICH IS A SUPPLEMENT TO THE CATALOG. IF YOU HAVE FURTHER CONCERNS, PLEASE DO NOT HESITATE TO CONTACT D-M-E APPLICATION ENGINEERING.

Togglelok.doc

OCTOBER, 2004