US Section E - page 26

U.S. 800-626-6653 • Canada 800-387-6600 • Worldwide +1-248-398-6000
DME price list:
372
Ferrogard™
Magnetic Water Filter
The Process
The Ferrogard allows process fluid to pass through
wide flow channels with negligible pressure drop. As
the fluid flows through the field effect areas, ferrous
particles are drawn into the collection zones. These
zones hold significantly more contaminant than a
conventional filter - without obstructing fluid flow
or risking “wash-off”. Therefore, the Ferrogard is
effective for extended periods without service and is
easily replaced as needed.
Wetted Parts and Materials
Connection Sizes(NPT).................................
1
4
”,
3
8
”,
1
2
End Caps...............................................................Brass
Plates ..............................................Nickel Plated Steel
Body............................................................Polysulfone
O-Ring.................................................................EPDM
Magnets .................................................C5/C8 Ferrite
Specifications
Max Working Pressure.........................150psi (10bar)
Max Temperature..................................240°F (116°C)
Dimensions
..........................................................1.5 × 1.5 × 2.625”
............................................................38 × 38 × 67mm
Weight .......................................0.75 pounds (0.34kg)
General Description
Ferrogard™ Filter removes contaminant particles
smaller than one micron from process cooling fluids
and hydraulic systems. This includes the smallest and
most abrasive particles that are responsible for the
destructive chain reaction of wear.
Injection molds often have small cooling water paths
that are easily blocked by rust and machining debris.
Cooling lines incorporating bubblers and baffles are
particularly susceptible to blockage from rust and
corrosion travelling through water lines. A Ferrogard
installed in the incoming water path will trap these
metallic contaminants before they enter a mold,
keeping your internal cooling passages clear during
processing.
Used in injection molding cooling water and
hydraulic systems, the Ferrogard extends the life
of injection molds, manifolds, hoses, pumps, heaters,
and chillers that are vulnerable to wear caused by fine
ferrous debris.
Benefits
••
Reduced hot spots in tooling resulting in more
consistent molded part quality
••
Reduced tool and hydraulic system maintenance
••
Less fluid/additive consumption
••
Negligible pressure drop
••
Decreased wear in pumps, heaters and chillers
••
Helps keep bubblers and baffles clear
US Patent 6,743,365
EU Patent 1,076,601
Design and specifications are subject to
change without notice.
Pricing
FG2A
1
4
” NPT
FG3A
3
8
” NPT
FG4A
1
2
” NPT
FGCORE
Replacement Core
1...,16,17,18,19,20,21,22,23,24,25 27,28,29,30,31,32,33,34,35,36,...126
Powered by FlippingBook